Written by Super Administraotor
Wednesday, 22 July 2009 15:43

The ARGUS DA-884P is a 12 wireless channel, plus optional 8 hardwired zone, security system, integrated with the built-in voice dialer, and is designed for both residential and commercial uses. This ARGUS DA-884P features the latest learning code technology for RF communication identification among the components of the System. In addition to the modern concept on security, the ARGUS DA-884P contains also the built-in voice dialer for sending 4 pre-recorded specific emergency messages directly to the maximum 8 helpers. It is important to remind that since the ARGUS DA-884P is wire free system, it is absolutely no need for unsightly wiring throughout the houses and is easy to dismantle and move afterwards.

RF Carrier Frequency
303.875MHz, 426.5MHz, 433.92MHz, 868.35MHz
Other frequencies are under requested
Approvals
CE and R&TTE for all EEC countries
Other approvals are pending
RF Communication Range
Up to 250 meters in open space at 25 degree C
System Codes
268,000,000 (i.e. to the 28th power combination)
Operating Temperature
0 to 40 degree C
Transmitting Power
Less than 10mW
|

|
|
Control Console DA - 884 The heart of the System receives the alarming signal form the sensors , set up to detect the intrusions and to respond the emergencies , and sends the emergency messages to the appropriate helpers.
The control console features : * 8burglary and 4emergency wireless sensor channels. * 8 telephone numbers for sending the emergency calls. * 4 voice messages pre-recorded for specific alarming status. * More than 260 million learning code combinations. * Low battery power warning for main back-up and transmitters. * EEPROM retains programmed data and voice messages while power failure. * Superheterodyne RF technology receiver. * Rectangular LED displays and 7-segament LED display for status indication. * Optional two-way listen-in and remote programming available. * 3 operational modes , Away , Home and Off/Bell , available. And , the control console programs: * Master code. * User code and usage. * Alarm memory and low battery power display. * Exit/Entry/Alarm times. * Input and Output tests. * Telephone numbers. * Voice messages. * System status.
|
|
Control Console DA - 884
Working Power 16.5V AC adaptor
Back - up Battery 12V DC 1.2AH rechargeable battery
Power Consumption 65mA in standby; 300mA in alarming internal siren
Operating Modes Away, Home and Off / Bell
Testing Modes Input (transmitters and sensors) and output (console)
Operating Codes 1 Master and 1 User, 3 to 8 digits programmable
Protection Zones 8 Burglary, 1 Fire, 1 Tamper, 1 Panic and 1 Emergency
Zone Types Away mode - Zone 1 & 2 Delayed the rest Instant Home mode - Shunted, Instant or Delayed Bell mode - Zone 1 only during disarmed mode
Zone Activation Transmitters and optional 8 wired loops
Relay Outputs 5A (120V AC/24V DC) N.O./N.C. dry contacts
Exit Delay 0 to 255 seconds programmable
Entry Delay 0 to 255 seconds programmable
Alarm Duration 0 to 2550 seconds programmable
Telephone Number 8, with maximum 24 digits per number
Voice Message 1 12-second Common and 4 2-second Specific message |
|
|
Last Updated ( Tuesday, 27 October 2009 13:50 )